Product Description
The Poly Load Wheel Assembly is designed for efficient load handling and mobility in various applications. This assembly includes high-quality bearings for smooth operation and durability.
Specifications: 3.000 inch diameter x 3.750 inch width (3.000" x 3.750" | 3 x 3.75 wheel | 3 x 3-3/4 | 76.20mm x 95.25mm) | Bearing ID: 20mm (0.787 inch bore | 20.000mm ID)
• Constructed from durable poly material for long-lasting performance
• Includes precision bearings for enhanced movement
• Suitable for a variety of industrial and commercial applications
This load wheel assembly is compatible with various equipment and machinery, making it an essential component for efficient operations.
Specifications
Frequently Asked Questions
Q: What is the relationship between the GW 130 and the GW 127 wheel assembly?
A: The GW 130 and GW 127 share the same basic dimensions: 3.000 inch diameter by 3.750 inch width and a 20mm (0.787 inch) bearing bore. They are designed for the same equipment types and are often interchangeable on standard manual pallet jacks. However, always verify your equipment manual specifies GW 130 or confirm cross-reference equivalence before substituting parts.
Q: Is the GW 130 suitable for rough or outdoor surfaces?
A: The GW 130 is constructed from durable poly material and is suitable for smooth warehouse floors, concrete, and asphalt. It performs adequately on light outdoor use. However, for heavy outdoor use, gravel, or extremely rough surfaces, this wheel may experience faster wear. The precision bearings provide smooth operation on standard surfaces. If equipment operates primarily outdoors, inspect the wheel monthly and expect shorter replacement intervals than indoor-only use.
Q: How can I tell if the GW 130 bearing has failed?
A: Signs of bearing failure include noise during rotation (grinding, squeaking, or clicking), excessive drag when pushing the equipment, or visible play in the wheel when you grasp it side-to-side. Spin the wheel by hand; it should rotate freely for several complete revolutions without resistance. If the wheel stops quickly or requires force to turn, replace the wheel immediately. Do not continue operation with a failing bearing, as this risks equipment tipping or loss of control.
Q: What is the step-by-step installation process for the GW 130?
A: Park the pallet jack or cart on a level surface and ensure it is stable. Locate and remove the axle clip or cotter pin from each side. Slide the old wheel off the axle shaft. Align the 20mm bearing bore of the GW 130 with the axle. Slide the wheel onto the axle and reinstall the clip or pin. Verify the wheel rotates smoothly by spinning it by hand. Check that the equipment is stable and mobile before returning it to service.
Q: What are the load capacity, service life, and maintenance schedule for the GW 130?
A: The GW 130 supports standard material-handling equipment loads, typically 5000 pounds capacity for pallet jacks. Inspect wheels weekly for cracks, flat spots, or tread separation. Clean the tread regularly to maintain grip. Lubricate the 20mm bearing every 6 months or when rotation becomes stiff, following your equipment manual. The poly material and precision bearings provide enhanced movement and durability. Under normal indoor warehouse use, expect 3 to 4 years of service life before tread degradation or bearing wear requires replacement.