Product Description
Crown load wheel assembly part number 100462 with 3.25 inch diameter and 6.5 inch tread width. Polyurethane bonded to cast iron core with dual 6205-2RS sealed bearings, 25mm bore. Available in multiple durometer grades from 95A to 99A Shore hardness. Compatible with Crown PE 3000, PE 4000, and PE 4500 series electric pallet trucks.
Specifications
Material & Construction
| Core Construction | Cast iron hub assembly |
| Polyurethane Hardness - XL Grade | 97 Shore A durometer |
| Polyurethane Hardness - Hyload Grade | 98 Shore A durometer |
Mechanical Specifications
| Bearing Type | Dual 6205-2RS sealed ball bearings with spacer |
Part Numbers & Compatibility
| OEM Part Number | Crown 100462 |
| Crown Part Number Variations | 100462, CR100462, 100461 |
| Equipment Compatibility | Crown PE 3000 Series with riser assemblies, 9 inch and 10 inch fork configurations, single wheel setup |
| Additional Equipment Compatibility | Crown PE 4000 and PE 4500 electric drive wheel units |
Performance Specifications
| Application Classification | Heavy load capacity, extended run applications |
Frequently Asked Questions
Q: What Crown electric pallet jack models is CR 100462-040-A compatible with?
A: CR 100462-040-A is a complete load wheel assembly compatible with Crown PE 3000, PE 4000, and PE 4500 series electric pallet jacks. For PE 3000 units, it works with 9-inch and 10-inch fork riser assemblies in single-wheel configurations. Verify your specific model before ordering to ensure fitment.
Q: What are the physical dimensions and bearing specifications of CR 100462-040-A?
A: CR 100462-040-A has a 3.25-inch outer diameter and a 6.5-inch tread width. The assembly includes dual 6205-2RS sealed ball bearings with a 25mm bore. The polyurethane tread is bonded to a cast iron core and available in multiple Shore hardness grades ranging from 95A to 99A, allowing you to select the durometer that matches your floor and load conditions.
Q: What does the 6205-2RS bearing designation mean?
A: 6205-2RS refers to a sealed deep-groove ball bearing where 6205 is the size and 2RS indicates it has rubber seals on both sides. The two seals reduce contamination ingress and retain grease, extending bearing life in warehouse environments. The 25mm bore fits the axle shafts on Crown PE series equipment.
Q: Can I select different Shore hardness grades for the CR 100462-040-A?
A: Yes, CR 100462-040-A is available in Shore hardness grades from 95A to 99A. Lower durometer (95A) provides better grip and shock absorption on smooth, wet, or cold floors. Higher durometer (99A) offers greater wear resistance on abrasive or rough floors. Choose based on your primary floor surfaces and load profiles.
Q: Does CR 100462-040-A come pre-assembled with bearings and spacers?
A: Yes. CR 100462-040-A is a complete assembly that includes the polyurethane tread, cast iron core, dual sealed bearings, and spacers. It is ready to install as a unit and does not require bearing installation or wheel assembly.