Product Description
POLY WHEEL 95A
Specifications: 5.000 inch diameter x 3.500 inch width (5.000" x 3.500" | 5 x 3.5 wheel | 5 x 3-1/2 | 127.00mm x 88.90mm)
Specifications
Wheel Dimensions
| Material | Cushothane XL |
| Outside Diameter | 5 |
| Inside Diameter | 2.281 |
| Width Side to Side | 3.5 |
| Tread Profile | Angle |
| Bore Depth | 0.67 |
| Bore Outside Diameter | 2.438 |
Frequently Asked Questions
Q: What are the exact dimensions of the SU S9853 poly wheel?
A: The SU S9853 measures 5.000 inch diameter by 3.500 inch width (also expressed as 5 x 3.5 or 127.00mm x 88.90mm). The bore inside diameter is 2.281 inches with a bore outside diameter of 2.438 inches. Bore depth is 0.67 inches. Verify these exact specs against your machine drawing before ordering.
Q: Is the SU S9853 compatible with my Crown or Yale pallet jack?
A: The SU S9853 fits Crown and Yale models that call for a 5 x 3.5 poly load wheel with a 2.281 inch bore. Cross-reference your jack serial number or machine plate against Crown and Yale parts diagrams. If your old wheel is also 5 x 3.5, the SU S9853 is likely compatible. Contact us with your machine details to confirm.
Q: What does Cushothane XL material mean for this wheel?
A: Cushothane XL is a durable polyurethane compound that resists cutting, abrasion, and oil damage. It is harder and longer-lasting than standard rubber load wheels. Cushothane XL wheels perform well in most warehouse conditions including dry, wet, and cold environments. They grip better on smooth concrete than rubber and maintain traction longer into their service life.
Q: How long does the SU S9853 typically last before replacement?
A: Lifespan depends on daily use and floor type. Cushothane XL wheels typically last 2-4 years in active service, or 5-7 years in light-use environments. Inspect quarterly for flat spots, cracks, or uneven wear. Replace immediately if chunks break out of the tread or the wheel does not roll freely.
Q: Can I install the SU S9853 without professional help?
A: Yes, installation is straightforward. Remove the wheel pin and snap ring from the axle, slide off the old wheel, and slide the SU S9853 onto the axle bore. Replace the snap ring and wheel pin. Use an appropriate wrench and ensure the snap ring seats fully in its groove. If the wheel does not slide on smoothly, the bore may be dirty or the axle may be bent; clean or straighten before proceeding.
Q: What is the tread profile of the SU S9853?
A: The SU S9853 features an Angle tread profile. This design provides grip on inclines and smooth flooring while allowing smooth rolling on flat surfaces. Angle tread wheels shed debris better than block tread but may track differently than load wheels on older machine models; verify compatibility if switching from a different tread style.