Product Description
Pramac PC S0013020079 is an OEM lifting link engineered for 27 inch wide manual pallet jack frames, designed to transmit lift force through the jack linkage. Fabricated from high-strength steel with a powder coat industrial finish, it fits GS and GS PRO series chassis and accepts OEM bushings and fasteners.
Compatibility: Fits pallet jacks made by Pramac, model GS22. SKU: PC S0013020079
Specifications
Material & Construction
| Material Specification | High-strength steel |
| Finish | Powder coat industrial finish |
Part Numbers
| OEM Part Number | PC S0013020079 |
| Compatible Equipment | Pramac manual pallet jack, 27 inch wide configuration |
Frequently Asked Questions
Q: What is the PC S0013020079 lifting link used for?
A: The PC S0013020079 is an OEM lifting link engineered to transmit lift force through the pallet jack linkage. It is part of the hydraulic chain that converts pump pressure into vertical fork height, designed specifically for 27 inch wide Pramac manual pallet jack frames.
Q: Which Pramac models does the PC S0013020079 fit?
A: The PC S0013020079 is compatible with Pramac GS22 manual pallet jacks and fits GS and GS PRO series chassis with 27 inch wide frame configurations. Verify your equipment chassis designation before ordering.
Q: What material and finish specifications does the PC S0013020079 have?
A: The PC S0013020079 is fabricated from high-strength steel and features a powder coat industrial finish. High-strength steel withstands the cyclic stresses of repeated lifting, while the powder coat protects against moisture and corrosion in wet or cold storage environments.
Q: What hardware does the PC S0013020079 accept?
A: The PC S0013020079 is engineered to accept OEM Pramac bushings and fasteners. Use only compatible hardware to maintain structural integrity and prevent premature wear on the bushing bore or fastener holes.
Q: What maintenance or inspection is needed for the PC S0013020079?
A: Periodically inspect the link for visible cracks or powder coat damage, which may allow rust to initiate. Check bushing wear by monitoring any lateral play in the linkage. If you notice uneven lifting or the forks tilting to one side, the link or its bushings may be worn.
Q: When should the PC S0013020079 be replaced?
A: Replace the lifting link if it develops visible cracks, bends, or fatigue fractures. If bushing wear causes excessive play and lifting becomes uneven or jerky, the link and its bushings should be replaced together to restore proper linkage geometry.