Product Description
Pramac PC G095005 O-Ring for manual pallet jack hydraulic system; nitrile rubber, ISO 3601 standard, 18mm inner diameter, 2.5mm section, 2500 PSI rated; fits Pramac OEM pump assemblies.
Compatibility: Fits pallet jacks made by Pramac, model GS22. SKU: PC G095005
Specifications
Material & Construction
| Seal Material | Nitrile rubber (NBR) per ISO 3601 |
| Elastomer Hardness | 70 Shore A nominal |
| Fluid Compatibility | Mineral oil hydraulic fluids ISO VG 32-68 |
| Environmental Compliance | RoHS compliant construction |
Mechanical Specifications
| Pressure Rating | Maximum 2500 PSI hydraulic service |
Part Numbers & Compatibility
| OEM Part Number | PC G095005 |
| Manufacturer Part Number | PCG095005 |
Frequently Asked Questions
Q: What are the specifications of the PC G095005 O-ring?
A: The PC G095005 is a nitrile rubber (NBR) O-ring per ISO 3601 standard with an 18mm inner diameter and 2.5mm section thickness. Elastomer hardness is 70 Shore A nominal, and the pressure rating is maximum 2500 PSI for hydraulic service.
Q: Which Pramac models use the PC G095005 O-ring?
A: The PC G095005 fits Pramac OEM pump assemblies used in GS series manual pallet jacks, including the GS22 model. Verify your specific equipment before ordering to ensure proper fitment.
Q: What hydraulic fluids are compatible with the PC G095005?
A: The PC G095005 is compatible with mineral oil hydraulic fluids ISO VG 32-68. Do not use with synthetic, water-based, or non-standard hydraulic fluids without verifying elastomer compatibility.
Q: What is the pressure rating for the PC G095005 O-ring?
A: The PC G095005 is rated for a maximum 2500 PSI hydraulic service pressure. Do not use in applications exceeding this pressure rating, as seal failure may result in hydraulic system loss and equipment malfunction.
Q: When should the PC G095005 O-ring be replaced?
A: Replace the O-ring if hydraulic fluid leaks from the pump assembly, if lifting pressure drops, or if the seal shows visible cracking, hardening, or deformation. Nitrile rubber seals degrade over time with exposure to heat and hydraulic fluid.
Q: What is the OEM part number for this O-ring?
A: The OEM part number is PC G095005. The manufacturer part number is PCG095005. Ensure exact part number match when ordering to avoid compatibility issues.