Product Description
Precision Ball Bearing W/ Extended Inner Rings OD: 2.441 inch or 62MM; ID: 25MM; Width: 0.551 inch or 20MM
Frequently Asked Questions
Q: What are the exact dimensions of the BS 8605 2RS bearing?
A: The BS 8605 2RS is a precision ball bearing with extended inner rings. Outer diameter is 2.441 inches (62 mm), inner diameter is 25 mm, and width is 0.551 inches (20 mm). The dual rubber seals (2RS) protect against moisture and contamination.
Q: How does the BS 8605 2RS compare to the BS 8505 2RS?
A: Both are sealed precision ball bearings with 25 mm bore, but the BS 8605 2RS has a larger outer diameter (2.441 inches vs. 2.047 inches) and narrower width (0.551 inches vs. 0.669 inches). Use the BS 8605 2RS where housing dimensions require a wider outer diameter and tighter axial space.
Q: What pallet jack models and brands use the BS 8605 2RS?
A: The BS 8605 2RS fits electric pallet jacks, load wheel assemblies, and drive motors from Crown, Toyota, Raymond, Yale, Jungheinrich, Linde, and BT material handling equipment. Extended inner rings accommodate multiple mounting configurations across OEM platforms.
Q: Is the BS 8605 2RS suitable for cold storage and wet environments?
A: Yes. The 2RS dual rubber seals provide effective protection against water, ice, and salt spray. The sealed design maintains factory grease in cold storage conditions (down to -4 degrees Fahrenheit) and resists moisture intrusion in wet dock and freezer operations.
Q: What maintenance is required for the BS 8605 2RS bearing?
A: Sealed bearings like the BS 8605 2RS require minimal maintenance. Inspect for noise, rough rotation, or seal damage during routine equipment checks. Do not attempt to relubricate sealed bearings; replacement is necessary if seals are compromised or bearing performance degrades.