Product Description
12VDC pump motor, 2 kW (2.68 HP), 9-spline 0.484 inch shaft, 4.5 inch OD, double ball bearing construction. Supersedes multiple Fenner Stone and Arrowhead part numbers. Compatible with Big Joe, Prime Mover, and industry-standard hydraulic lift systems by cross-reference.
Specifications
Electrical
| Motor Voltage | 12VDC |
| Motor Power Output | 2.0 kW (2.68 HP) |
Part Numbers
| OEM Part Number | No direct OEM number identified for BJ 901547; cross-references above |
Frequently Asked Questions
Q: What are the electrical specifications of the BJ 901547 pump motor?
A: The BJ 901547 is a 12VDC pump motor rated at 2 kW (2.68 HP) output power. Confirm your lift truck electrical system is 12VDC before ordering. Using this motor on incompatible voltage systems will cause failure and void warranty.
Q: What shaft configuration does the BJ 901547 have?
A: The BJ 901547 features a 9-spline shaft with 0.484 inch diameter and 4.5 inch outer diameter (OD). Verify the pump coupling or drive interface on your equipment matches this spline configuration and diameter before ordering.
Q: What is the bearing construction of the BJ 901547?
A: The BJ 901547 uses double ball bearing construction, which provides durability for hydraulic pump applications. Double ball bearings reduce runout and side-load wear, extending motor lifespan under typical lift truck operating conditions.
Q: What equipment does the BJ 901547 motor fit?
A: The BJ 901547 is compatible with Big Joe, Prime Mover, and industry-standard hydraulic lift systems. Cross-reference compatibility includes multiple Fenner Stone and Arrowhead part numbers. Verify your specific equipment model and motor mounting before ordering.
Q: How long is the expected lifespan of the BJ 901547 pump motor?
A: Motor lifespan depends on electrical load, operating temperature, bearing condition, and maintenance. Regular inspection of bearings, electrical connections, and shaft alignment will extend service life. Replace the motor if it no longer maintains rated RPM, draws excessive current, or produces unusual noise or heat.
Q: Is the BJ 901547 a direct replacement for other pump motors?
A: The BJ 901547 supersedes multiple Fenner Stone and Arrowhead part numbers in hydraulic lift applications. Verify the exact cross-reference for your equipment by providing the original part number. Shaft spline, OD, mounting, and voltage must all match your pump for proper operation.