Product Description
Jet JT-PT2036-3-24 Push Rod is a manufacturer OEM replacement for manual pallet jack frame assemblies featuring 36 inch long forks. Designed specifically for Jet PTW Series units, this longitudinal steel push rod ensures precise fork lift and lower function.
Compatibility: Fits pallet jacks made by Jet, model JT-PT2036-3-24. Alternate model: JTPT2036324; JT PT2036 3 24. SKU: JT-PT2036-3-24
Specifications
Part Numbers
| Manufacturer Part Number | JT-PT2036-3-24 |
| OEM Part Number | JT9-PT2036-3-24 |
| Compatibility | Compatible with Jet PTW Series manual pallet jacks equipped with 36 inch long forks |
Frequently Asked Questions
Q: What is the JT-PT2036-3-24 push rod used for?
A: The JT-PT2036-3-24 is a longitudinal steel push rod that is part of the frame assembly on manual pallet jacks with 36 inch long forks. It transfers mechanical force from the hydraulic cylinder linkage to control fork lift and lower functions.
Q: Which Jet pallet jack models use the JT-PT2036-3-24?
A: The JT-PT2036-3-24 is compatible with Jet PTW Series manual pallet jacks equipped with 36 inch long forks. Confirm both the PTW series designation and 36 inch fork length before ordering.
Q: What are the alternate part number designations for the JT-PT2036-3-24?
A: This part is also referenced as JT9-PT2036-3-24 (OEM designation), JTPT2036324, and JT PT2036 3 24. All refer to the same push rod assembly.
Q: What material is the JT-PT2036-3-24 made from?
A: The JT-PT2036-3-24 is constructed from steel to provide the strength and rigidity needed to transfer hydraulic forces through the frame assembly without deflection or twisting.
Q: Can the JT-PT2036-3-24 be used on pallet jacks with fork lengths other than 36 inches?
A: No. The push rod length and pivot points are engineered specifically for 36 inch forks. Using this rod on different fork lengths will cause misalignment, binding, or failure of the lift mechanism. Verify the fork length matches the part specification.
Q: What indicates that the JT-PT2036-3-24 needs to be replaced?
A: Replace the push rod if you observe bending, twisting, cracks, or permanent deformation to the steel. Also replace it if the pivot pin holes are enlarged or damaged, or if the forks no longer lift and lower smoothly and evenly.