Product Description
Valu-Jack VJ 55F19 push rod is a direct-fit steel component for 48-inch forks, designed for the Valu-Jack 5500-2 manual pallet jack and installed in the frame section to connect and actuate fork movement.
Compatibility: Fits pallet jacks made by Valu-Jack, model 5500-2 Frame. Alternate model: 55002 Frame; 5500 2 Frame. SKU: VJ 55F19
Specifications
Material & Construction
| Primary Material | Steel, industrial grade |
Part Numbers
| Manufacturer Part Number | VJ 55F19 |
| OEM Part Number | VJ 55F19 |
| Compatible Models | Valu-Jack 5500-2 manual pallet jack |
Frequently Asked Questions
Q: What is the VJ 55F19 push rod and what does it do?
A: The VJ 55F19 is a steel push rod component designed for 48-inch fork assemblies on Valu-Jack 5500-2 manual pallet jacks. It transmits lifting force from the hydraulic system to actuate the fork movement during load raising and lowering operations.
Q: Which equipment models is the VJ 55F19 compatible with?
A: The VJ 55F19 push rod is designed for Valu-Jack 5500-2 manual pallet jacks with 48-inch forks. It is compatible with alternate model numbers 55002 and 5500-2. Verify your equipment has 48-inch forks before ordering.
Q: What material and construction is the VJ 55F19?
A: The VJ 55F19 is manufactured from industrial-grade steel. Direct-fit construction means the rod length and diameter are pre-dimensioned for the Valu-Jack 5500-2 frame and hydraulic linkage geometry.
Q: How does the VJ 55F19 connect to the frame and forks?
A: The VJ 55F19 push rod installs in the frame section to bridge the hydraulic actuator and the fork lift linkage. It converts linear hydraulic motion into the upward and downward movement of the 48-inch fork assembly.
Q: What signs indicate the VJ 55F19 push rod needs replacement?
A: Replace the VJ 55F19 if it develops visible bending, cracks, or corrosion that causes binding. If the forks do not raise or lower smoothly, or if there is jerky or uneven fork movement, a bent or damaged push rod may be the cause.