• RL RL-31-S, Load Roller Assy, Steel W/ Flanged Bearings, 3-1/4 Dia.
Up to $21.71 off

Load Roller Assembly for Rol-Lift Series T, Series E

RL RL-31-S

Load Roller Assembly, steel replacement for Rol-Lift Series T, Series E, and T42A manual pallet jacks.

$37.39
$37.39 $59.10
Shipping calculated at checkout.
In stock
Size: 3.25" × 3.875" (83 × 98 mm)
⌀ 3.25" (83 mm) 3.875" (98 mm) wide schematic — drawn to listed dimensions
  • Expert support & fitment help
  • 30-day returns
  • Fast Shipping
frame Load Wheels Manual Pallet Jack Parts Rol Lift Rol Lift Series T and E TE Wheels

Compatibility

Make

Rol-Lift

Model

Series T, Series E, T42A

Visit our diagram page for part references to popular models

  • • appears in Rol-Lift Series E Frame Unit Diagram
  • • appears in Rol-Lift Series T Frame Unit Diagram

    • Product Description

    Load Roller Assembly, part number RL RL-31-S, is a steel replacement load roller for Rol-Lift Series T, Series E, and T42A manual pallet jacks. This assembly is designed for reliable warehouse operation and is cross-compatible with RL RL-31-S-3 and RL-31-S equivalent part numbers.

    Specifications

    Material & Construction
    MaterialSteel
    HardnessHub and tread: minimum 45 Rockwell C (steel component)
    Core ConstructionFabricated from ASTM A36 grade steel
    Part Numbers & Compatibility
    MakeRol-Lift
    ModelSeries T, Series E, T42A
    Manufacturer Part NumberRL RL-31-S
    Cross-Reference Part NumbersRL RL-31-S-3, RL-31-S, RL-31-S-3, RLRL-31-S-3, Rol-Lift RL-31-S, Rol-Lift RL-31-S-3, RLRL31S3, RL31S3, RolLift RL31S3, 31S3
    CompatibilityFits Rol-Lift Series T and Series E manual pallet jacks
    Equivalent Part NumbersRL RL-31-S-3, RL-31-S, RL-31-S-3, RLRL-31-S-3, Rol-Lift RL-31-S, Rol-Lift RL-31-S-3, RLRL31S3, RL31S3, RolLift RL31S3, 31S3, lLift
    Cross Reference Part NumbersRL RL-31-S-3, RL-31-S, RL-31-S-3, RLRL-31-S-3, Rol-Lift RL-31-S, Rol-Lift RL-31-S-3
    Part NumberRL RL-31-S
    Wheel Dimensions
    Outside Diameter3-1/4 in
    Width3-7/8 in
    Performance Specifications
    Service Life RatingRated for over 15,000 cycles at full rated capacity
    Additional Specifications
    Surface FinishPlated finish for corrosion resistance
    Included ComponentsLoad roller assembly with 2 steel washers
    Washer MaterialHardened steel
    Supersedes/ReplacesSupersedes RL-31-S, replaces RL RL-31-S-3
    Corrosion ProtectionSteel roller with plated finish
    Service LifeRated for over 15,000 cycles at full rated capacity

    Frequently Asked Questions

    Q: What equipment does the RL RL-31-S load roller assembly fit?
    A: The RL RL-31-S is designed for Rol-Lift Series T, Series E, and T42A manual pallet jacks. It is cross-compatible with RL RL-31-S-3 and RL-31-S equivalent part numbers. Verify your jack model and serial range before ordering to ensure fit compatibility.

    Q: What material is used in the RL RL-31-S assembly?
    A: The RL RL-31-S assembly is made of steel for durable service in manual pallet jack applications.

    Q: How long does an RL RL-31-S load roller typically last?
    A: The assembly is rated for over 15,000 cycles at full rated capacity. Actual service life depends on load frequency, warehouse conditions, and maintenance. Inspect regularly for grinding noise, wobbling, or flat spots on the roller surface, and replace immediately if damage is detected.

    Q: How should the RL RL-31-S be stored when not in use?
    A: Store the steel assembly in a dry location and keep it clean and free from moisture, salt, and corrosive materials. Proper storage helps maintain functionality.

    Q: When should the RL RL-31-S be replaced?
    A: Replace the RL RL-31-S when the roller shows damage, wobbling, grinding noise, or flat spots. Confirm compatibility with Rol-Lift Series T, Series E, or T42A manual pallet jacks before ordering.