Product Description
ROLL PIN
Frequently Asked Questions
Q: What are the specifications for the 95363-06040-71 roll pin?
A: The 95363-06040-71 is a 6mm diameter by 40mm length roll pin manufactured from spring steel with zinc plating. This size is used in various manual pallet jack assemblies. Confirm these dimensions match your equipment specification before ordering to ensure proper fit and function.
Q: Is the 95363-06040-71 roll pin compatible with electric pallet jacks or only manual models?
A: The 95363-06040-71 is specified for manual pallet jack applications. While similar roll pins may be used in electric models, verify your specific equipment type and model matches this part number. Use only the roll pin size and type specified in your equipment assembly documentation.
Q: What material and corrosion resistance does the 95363-06040-71 provide?
A: The 95363-06040-71 is spring steel with zinc plating to resist corrosion. Zinc plating provides protection in typical warehouse conditions and brief outdoor exposure. In wet or salt-spray environments, inspect the pin periodically for corrosion and replace if significant rust develops.
Q: How do I verify the 95363-06040-71 is the correct roll pin for my pallet jack?
A: Check your pallet jack model documentation, assembly diagram, or existing pin for diameter and length specifications. The 95363-06040-71 is 6mm diameter by 40mm length. If your equipment specifies a different size, order the correct part number to avoid fitment problems.
Q: Can the 95363-06040-71 roll pin be reused or should it always be replaced?
A: Roll pins should not be reused if removed during disassembly. Springs steel pins lose tension and holding force after removal. Always install new roll pins to ensure proper assembly retention and prevent unexpected separation during operation. Cost-benefit favors replacement over reuse.
Q: What load does the 95363-06040-71 roll pin withstand?
A: A 6mm diameter spring steel roll pin typically handles 3000 to 4500 pounds of shear load depending on assembly design and application. Manual pallet jacks with 5000-pound capacity use appropriately sized pins. Do not overload the pallet jack beyond its rated capacity.