Product Description
Rubber Press-On
Specifications: 16.250 inch diameter x 7.000 inch width (16.250" x 7.000" | 16.25 x 7 wheel | 412.75mm x 177.80mm)
Specifications
Wheel Specifications
| Outside Diameter (in) | 16.250 |
| Width (in) | 7.000 |
| Outside Diameter (mm) | 412.75 |
| Width (mm) | 177.80 |
| Drive Tire Profile | Smooth Flat |
| Material | Rubber |
Frequently Asked Questions
Q: How does SU 16.25X7X11.25-SF-R differ from the 6-inch wide version?
A: SU 16.25X7X11.25-SF-R is 1 inch wider (7 inches vs 6 inches) than SU 16.25X6X11.25-SF-R, providing greater contact area and load distribution. The wider tire requires different brake geometry spacing and hub assembly clearance. Do not interchange these parts without physically measuring your hub assembly width. Using an incorrect width can cause brake drag, steering issues, or hub contact damage. Verify your truck specifications before ordering.
Q: What is the load capacity for SU 16.25X7X11.25-SF-R?
A: SU 16.25X7X11.25-SF-R supports the same dynamic load rating as equipment-specific drive tires in this size class (typically 3000-5000 lbs per wheel depending on lift truck rated capacity). Exceeding your trucks rated load limit will cause accelerated rubber wear, overheating, and rim damage regardless of tire quality. Always maintain tire pressures and loads within manufacturer specifications. Consult your truck manual for rated operating weight.
Q: Is metric sizing available for this tire?
A: SU 16.25X7X11.25-SF-R is specified in both imperial and metric dimensions: 16.25 inches OD equals 412.75 mm, 7 inches width equals 177.80 mm. Both measurement systems describe the same part. If cross-referencing against European equipment or manuals, convert dimensions using these equivalents: 16.25 OD and 7 width are universal fitment criteria.
Q: What is the profile type of this tire?
A: SU 16.25X7X11.25-SF-R has a smooth flat (SF) drive profile with no tread pattern, providing maximum rubber-to-floor contact for traction and steering response. The flat profile minimizes floor marking, making it ideal for retail and food service environments where tire marks are undesirable. This profile sacrifices snow/water drainage compared to treaded patterns, so performance in wet outdoor conditions is reduced.
Q: How long does press-on tire replacement take?
A: Press-on replacement of SU 16.25X7X11.25-SF-R takes approximately 60-90 minutes per wheel including heating, installation, and cooling time. Heating requires 30-40 minutes in a tire warmer oven set to 200-250 degrees Fahrenheit. Manual or press installation takes 10-15 minutes. Allow 30-45 minutes minimum cooling before operating the truck. Budget 2-3 hours for a full four-wheel tire replacement on a busy dock.
