Product Description
SOLENOID (24 VOLT)
Frequently Asked Questions
Q: What is the operating voltage for solenoid 220035697?
A: Solenoid 220035697 is a 24-volt DC solenoid for electric lift trucks and material handling equipment. Confirm your truck operates on 24-volt DC power before ordering. Never apply 12-volt or AC voltage, as this will destroy the solenoid coil.
Q: Which lift truck models and OEM brands use this 24-volt solenoid?
A: The 220035697 fits electric lift trucks from Crown, Toyota, Raymond, Hyster, Jungheinrich, Linde, Clark, and other OEM manufacturers with 24-volt DC hydraulic systems. Check your equipment parts manual for the exact solenoid connector type, mounting dimensions, and valve port threading before ordering.
Q: How do I test if solenoid 220035697 is functioning correctly?
A: Connect a multimeter set to DC voltage mode across the solenoid coil terminals while pressing the lift or lower control button. You should measure 24 volts. If voltage is present but the solenoid does not click or the valve does not respond, the coil may be open or the valve plunger may be stuck. If no voltage reaches the solenoid, check the battery, wiring, and control switch.
Q: What is the typical lifespan of a 24-volt solenoid in service?
A: A properly maintained 24-volt solenoid typically provides 4 to 8 years of reliable operation under normal warehouse duty. Premature failure can result from moisture contamination in the hydraulic circuit, weak battery voltage, or excessive vibration. Replace immediately if the coil insulation shows damage or if the solenoid fails to de-energize when the control is released.
Q: How does solenoid 220035697 compare to solenoid 220028614?
A: Both 220035697 and 220028614 are 24-volt solenoids, but they may differ in valve cavity configuration, flow rating, solenoid coil resistance, or connector style. Do not interchange them without confirming the mounting bore diameter, valve port sizes, and electrical coil specifications match your equipment. Contact us with your truck model and serial number for the correct part.
Q: What maintenance prevents solenoid failure?
A: Keep the hydraulic fluid clean by replacing filters on schedule. Maintain proper battery charge to prevent low-voltage stress on the solenoid coil. Check all electrical connections for corrosion or loose terminals. Avoid prolonged control button holding, which causes excessive heat in the solenoid coil. Inspect the solenoid connector for moisture and apply dielectric grease to terminals.