Product Description
SOLENOID (24 VOLT)
Specifications
Product Overview
| Part Number | 252806500 |
Physical Specifications
| Voltage Rating | 24 Volts DC |
| Function | Hydraulic Directional Control Solenoid |
| Solenoid Type | 24V DC Hydraulic Actuator |
| Typical Service Life | 5-10 Years (with proper maintenance) |
| Failure Modes | Coil Burnout, Moisture Intrusion, Vibration Damage |
Compatibility
| Applications | Lift, Lower, Tilt Functions |
| Compatible Equipment Types | Electric Forklifts, Electric Pallet Jacks, Electric Stackers |
Frequently Asked Questions
Q: What is the voltage specification for solenoid 252806500?
A: The 252806500 is rated at 24 volts DC. This solenoid is designed for electric lift truck systems that operate on 24V battery power. Do not install on systems with different voltages, as this will cause failure or damage.
Q: What does the 252806500 solenoid control in an electric lift truck?
A: The 252806500 solenoid engages hydraulic directional control valves to direct oil flow for lift, lower, and tilt functions. When energized by the control circuit, it shifts valve spools to direct the pump output to the appropriate cylinder.
Q: Which lift truck models use the 252806500 24-volt solenoid?
A: The 252806500 fits Crown, Toyota, Raymond, and similar electric lift trucks with 24V DC hydraulic systems. Verify your equipment model and control valve type before ordering, as solenoid dimensions and coil configurations differ by application.
Q: What causes a 24-volt solenoid to fail?
A: Solenoid failure typically results from coil burnout due to electrical overload, moisture intrusion into the coil housing, or prolonged exposure to vibration and heat. Symptoms include valve not shifting, intermittent operation, or complete loss of function with no response to control inputs.
Q: How long does a 24-volt solenoid like the 252806500 typically last?
A: A solenoid coil typically lasts 5 to 10 years with proper maintenance. Lifespan is reduced in high-duty environments with frequent cycling, extreme temperatures, or contaminated hydraulic fluid. Replace if the valve response becomes sluggish or fails to engage.
Q: Can the 252806500 solenoid be repaired or must it be replaced?
A: Solenoids are sealed assemblies and cannot be repaired in the field. If the coil fails, the entire solenoid must be replaced. Do not attempt to rewind or disassemble the unit, as this voids warranty and creates safety hazards.