Product Description
Radial single-row deep groove ball bearing, model BS 6006 2RS-25MM, designed for manual pallet jack applications. Features a 25 mm bore, 55 mm outside diameter, 13 mm width, chrome steel construction, contact rubber seals (2RS), and pre-filled with grease. Rated for 2970 lbf dynamic load and up to 12,000 RPM in grease lubrication.
Specifications
Material & Construction
| Bearing Steel Grade | Chrome steel, equivalent to SAE 52100 |
| Seal Material | Nitrile rubber (NBR) contact seal |
| Cage Material | Pressed steel |
Frequently Asked Questions
Q: What are the dimensions and load rating for the BS 6006 2RS-25MM bearing?
A: The BS 6006 2RS-25MM is a deep groove ball bearing with a 25 mm bore, 55 mm outside diameter, and 13 mm width. It has a dynamic load rating of 2970 lbf and is rated for up to 12,000 RPM in grease lubrication. This bearing is suitable for manual pallet jack wheel assemblies and similar light-to-medium duty applications.
Q: What material is the BS 6006 2RS-25MM bearing made from and what seals does it use?
A: The BS 6006 2RS-25MM features a chrome steel construction equivalent to SAE 52100 bearing steel for the races and balls. The cage is made from pressed steel. The bearing has contact rubber seals on both sides (2RS designation) made from nitrile rubber (NBR), and arrives pre-filled with grease for ready-to-use installation.
Q: Is the BS 6006 2RS-25MM compatible with OEM pallet jack wheel assemblies?
A: The BS 6006 2RS-25MM is designed for manual pallet jack applications. Verify that the 25 mm bore, 55 mm OD, and 13 mm width match your equipment before ordering. This bearing works with multiple OEM brands including Crown, Toyota, and Raymond models that use these standard dimensions.
Q: How long does the BS 6006 2RS-25MM bearing last before needing replacement?
A: The BS 6006 2RS-25MM is pre-filled with grease and sealed on both sides, which provides extended service life in dry and clean conditions. In normal manual pallet jack operation with moderate load cycling, expect 2-3 years of service before bearing wear requires replacement. Heavy-duty or wet environments will reduce lifespan. Replace if you notice rough spinning, play in the wheel, or grinding noise.
Q: What are the equivalent part numbers for the BS 6006 2RS-25MM?
A: The BS 6006 2RS-25MM is equivalent to standard 6006 2RS bearing specifications. Cross-references include SKF 6006-2RS, NSK 6006 2RSR, NTN 6006 2RS, FAG 6006 2RS, and Koyo 6006 2RS. Verify bore, OD, and width match before substituting any equivalent bearing.