Product Description
Steer Wheel Axle
Frequently Asked Questions
Q: What is the GW 414 steer wheel axle used for?
A: GW 414 is a steer wheel axle designed for manual pallet jacks. It supports the directional control wheel and allows smooth steering of the jack during positioning and movement.
Q: What should I inspect when evaluating whether to replace the GW 414?
A: Inspect the axle shaft for straightness, cracks, and corrosion. Check the wheel mounting surfaces for wear or damage. Listen for grinding or clicking noises during operation. If the wheel does not spin freely or the jack pulls to one side, replace the axle.
Q: Is the GW 414 compatible with all manual pallet jack brands?
A: No. GW 414 is designed for specific manual pallet jack models. Verify fitment by comparing the existing axle dimensions and part number on your jack. Different manufacturers use different axle specifications. Do not assume cross-brand compatibility without verification.
Q: What precautions must I take when replacing the GW 414 axle?
A: Ensure the jack is on a level surface and the load is fully lowered. Never work under a suspended load. Remove the wheel and axle assembly carefully to avoid dropping parts. Wear safety glasses. Test the steering after installation before operating the jack under load.
Q: How do I maintain the GW 414 to extend its service life?
A: Keep the axle clean and free of dirt and salt accumulation. Inspect regularly for corrosion, especially if used in outdoor environments. Ensure the retaining nut remains tight but does not bind the wheel. Lubricate the wheel bearing per manufacturer specifications if applicable.