Product Description
***Pricing good while supplies last***
Specifications: 10.500 inch diameter x 5.000 inch width (10.500" x 5.000" | 10.5 x 5.00 wheel | 10.5 x 5 | 266.70mm x 127.00mm)
Specifications
Wheel Specifications
| Outside Diameter (in) | 10.500 |
| Width (in) | 5.000 |
| Outside Diameter (mm) | 266.70 |
| Width (mm) | 127.00 |
| Drive Tire Profile | Smooth Flat |
| Material | Polyurethane |
Frequently Asked Questions
Q: What is the exact fitment for SU 10.5 X 5 X 6.5-SF-P on my electric lift truck?
A: SU 10.5 X 5 X 6.5-SF-P fits a 6.5 inch hub bore and is designed for drive wheel applications. Outside diameter is 10.500 inches and width is 5.000 inches (266.70mm x 127.00mm). Before ordering, verify your hub bore size and axle diameter. This tire cannot be substituted if your truck has a different hub bore size without mechanical modification.
Q: How does the smooth flat profile of this tire affect traction compared to center groove tires?
A: The smooth flat profile provides maximum contact area for load capacity on clean, flat indoor surfaces. Center groove tires (like SU 10.5 X 5 X 6.5-SP-G) offer slightly better lateral movement control on turns. For outdoor or wet conditions, a grooved tire is recommended. If your facility is strictly warehouse flooring, the smooth flat design delivers better load distribution and lower rolling resistance.
Q: What is the load capacity and operating temperature range for this polyurethane drive tire?
A: Polyurethane drive tires in this size typically support loads up to 1200-1500 lbs per tire depending on axle configuration. Operating temperature range is 0°F to 130°F for standard polyurethane formulation. Exposure to extreme heat causes softening and accelerated wear. Do not store in direct sunlight for extended periods. Check with your truck manufacturer for load rating specific to your model.
Q: Is this tire a press-on or bolt-on, and what tools are required for installation?
A: SU 10.5 X 5 X 6.5-SF-P is a bolt-on drive tire requiring an axle to mount. You will need a tire press and hub assembly kit specific to your truck model. Do not attempt hand installation. Most installations require 30-45 minutes per wheel. Always ensure the truck is on a level surface and the wheel hub is clean before mounting. After installation, rotate the wheel by hand to verify smooth operation before returning to service.
Q: How often should this polyurethane drive tire be replaced, and what are the failure symptoms?
A: Polyurethane drive tires typically last 1-3 years depending on usage intensity and facility conditions. Replace when tread is worn flat, when you observe chunks missing, or if the tire develops visible cracks. Early warning signs include increased noise, loss of steering precision, and reduced acceleration. Do not operate a truck with visibly damaged drive tires as this creates safety hazards and accelerates damage to the hub assembly.
Q: What maintenance extends the life of this SU drive tire?
A: Weekly inspection is recommended. Check for embedded debris, cracks, or unusual wear patterns. Keep the tire clean and free from oil or grease, which causes premature breakdown of polyurethane. Ensure proper tire pressure (if applicable to your model) and verify that wheels are not misaligned. Store spare tires indoors away from direct sunlight and heat sources. Replace both front or both rear tires together for consistent performance.