Product Description
Polyurethane drive tire press-on, smooth flat design, with nominal dimensions 10 inch outside diameter, 4.75 inch width, and 6.5 inch bore, suitable for electric lift truck drive wheel applications. OEM specification SU 10 X 4.75 X 6.5-SF-P. Applicable for use with Superior and compatible models. Manufacturer: Liftsplus.com.
Specifications: 10.000 inch diameter x 4.000 inch width (10.000" x 4.000" | 10 x 4.0 wheel | 10 x 4 | 254.00mm x 101.60mm)
Specifications
Material & Construction
| Tire Material | Polyurethane compound |
| Finish | Flat polyurethane tread |
Part Numbers
| OEM Part Number | SU 10 X 4.75 X 6.5-SF-P |
| Manufacturer Part Number | SU 10 X 4.75 X 6.5-SF-P |
Wheel Specifications
| Outside Diameter (in) | 10.000 |
| Width (in) | 4.000 |
| Outside Diameter (mm) | 254.00 |
| Width (mm) | 101.60 |
| Drive Tire Profile | Smooth Flat |
| Material | Polyurethane |
Frequently Asked Questions
Q: What does the part number SU 10 X 4 X 65-SF-P actually mean?
A: The part number breaks down as follows: SU = Superior polyurethane material, 10 = 10 inch outside diameter, 4 = 4 inch wheel width, 65 = 6.5 inch hub bore diameter, SF = smooth flat tread profile, P = press-on installation (tire pressed onto wheel hub). The exact OEM specification is SU 10 X 4.75 X 6.5-SF-P.
Q: Is the SU 10 X 4 X 65-SF-P compatible with my electric lift truck?
A: The SU 10 X 4 X 65-SF-P is compatible with electric drive wheel applications that use a 6.5 inch hub bore and require a 10 inch diameter drive tire. Verify that your current wheel hubs are 4 inch width and 6.5 inch bore diameter. If you are replacing tires from a different brand or profile, confirm with your truck OEM documentation or equipment nameplate before purchasing.
Q: What is the difference between a press-on tire and a lugged or wedge-mount tire?
A: A press-on tire like the SU 10 X 4 X 65-SF-P slides directly onto a smooth hub and is secured by mechanical friction and sometimes retaining clips. This design requires proper press equipment to install and remove without damaging the bore. Wedge-mount tires use a different hub interface. Do not attempt to swap press-on tires with wedge-mount designs as the hub geometry is incompatible.
Q: How do I install the SU 10 X 4 X 65-SF-P onto my wheel hub?
A: Use a tire press with a force gauge to press the tire onto the hub bore. Recommended press force is typically 8 to 15 tons depending on hub bore diameter and material. Center the tire on the hub and apply steady, even pressure. Do not use impact tools or hammer blows as these will damage the hub bore. If you lack a tire press, contact a wheel repair shop with industrial tire equipment.
Q: What is the load rating for the SU 10 X 4 X 65-SF-P drive tire?
A: The polyurethane compound load rating depends on the number of tires supporting the truck and operating conditions. Consult the lift truck manufacturer specification plate or OEM documentation for maximum gross vehicle weight rating. A single 10 inch polyurethane drive tire typically supports 1500 to 2500 lbs depending on hardness grade and hub size. Total truck load must be within GVWR.