Product Description
Drive Tire, Smooth Crown, Poly
Specifications: 10.000 inch diameter x 5.000 inch width (10.000" x 5.000" | 10 x 5 wheel | 10 x 5 | 254.00mm x 127.00mm)
Specifications
Wheel Specifications
| Outside Diameter (in) | 10.000 |
| Width (in) | 5.000 |
| Outside Diameter (mm) | 254.00 |
| Width (mm) | 127.00 |
| Material | Polyurethane |
Frequently Asked Questions
Q: What tire sizes are compatible with the SU 10 X 5 X 6.5-SC-P smooth crown polyurethane drive tire?
A: The SU 10 X 5 X 6.5-SC-P fits 10 inch diameter x 5 inch width hubs with a 6.5 inch bore. It is compatible with any electric lift truck requiring a 254.00 mm x 127.00 mm drive tire. Verify your lift truck rim bore diameter before ordering to ensure proper press-on fit. Cross-reference your existing tire part number or measure the hub bore with calipers if unsure.
Q: What is the material composition and load rating for this smooth crown polyurethane tire?
A: The SU 10 X 5 X 6.5-SC-P is constructed from industrial-grade polyurethane. Polyurethane offers non-marking floor protection and consistent traction on hard indoor surfaces. Load capacity depends on tire wall thickness and hub specifications. Do not exceed the lift truck manufacturer rated load limit. For heavy-duty warehouse use, verify the tire can handle your average load weight.
Q: How does the smooth crown tread design affect tire performance compared to smooth flat?
A: Smooth crown tires have a slightly convex center that channels water and liquid spills away from contact points, improving traction in wet or dirty conditions. Smooth flat tires distribute load more evenly and are preferred for dry, clean warehouses and smooth concrete. Choose smooth crown if your facility has drainage issues or frequent spill exposure.
Q: What is the typical lifespan and maintenance requirement for polyurethane drive tires?
A: Industrial polyurethane drive tires typically last 3-5 years under normal warehouse conditions, depending on daily hours of operation and load weight. Inspect every 6-12 months for cracking, hardening, or flat-spotting. Keep tires dry between uses and store away from direct sunlight. Replace immediately if you observe deep cracks, separation from the hub, or loss of traction.
Q: Can the SU 10 X 5 X 6.5-SC-P smooth crown tire be retrofitted to replace a worn smooth flat tire?
A: Yes, if the hub bore and rim diameter match exactly (10 inch x 5 inch x 6.5 inch bore). The smooth crown design requires no special hub modifications. Remove the worn tire by heating the hub slightly with an industrial heat gun and pulling straight off. Clean the hub bore of any rubber residue, then press on the new smooth crown tire using a tire press. Do not use a rubber mallet; apply steady hydraulic pressure.
Q: What floor surfaces are compatible with polyurethane smooth crown drive tires?
A: Polyurethane smooth crown tires work best on polished concrete, sealed concrete, tile, and low-pile vinyl floors. They provide non-marking performance on all standard warehouse flooring. Do not use on uneven outdoor pavement or steel ramps, as excessive abrasion will accelerate wear. Test traction on your specific floor before full deployment.
