Product Description
Poly Drive Tire
Specifications: 10.000 inch diameter x 4.500 inch width (10.000" x 4.500" | 10 x 4.50 wheel | 10 x 4-1/2 | 254.00mm x 114.30mm)
Specifications
Wheel Specifications
| Outside Diameter (in) | 10.000 |
| Width (in) | 4.500 |
| Outside Diameter (mm) | 254.00 |
| Width (mm) | 114.30 |
| Drive Tire Profile | Smooth Flat |
| Material | Polyurethane |
Frequently Asked Questions
Q: What is the exact fitment for SU 10X4.5X8-SF-P and will it fit my 10 inch wheel?
A: SU 10X4.5X8-SF-P fits 8 inch wide wheels with a 10 inch diameter. The tire itself is 10.000 inch outside diameter by 4.500 inch width (254.00mm x 114.30mm). This is not interchangeable with 10x4.75 tires. Verify your wheel width before ordering, as a 4.5 inch width tire on a 6.5 inch wheel or wider will cause handling issues and accelerated edge wear.
Q: Is the SU 10X4.5X8-SF-P polyurethane tire suitable for wet floor applications?
A: The smooth flat (SF) profile on this tire provides minimal tread and is NOT recommended for wet or slippery floors. Smooth tires are designed for clean, dry indoor warehouse floors. If you operate on wet concrete or tile, switch to a crowned profile drive tire or add an external traction coating. Using smooth tires on wet floors increases slip risk and reduces brake effectiveness.
Q: What is the maximum load rating and safe operating pressure for the 10X4.5X8-SF-P drive tire?
A: This is a solid polyurethane tire, not pneumatic, so it has no pressure rating. Load capacity depends on tire placement (front vs rear) and your truck model, typically ranging from 500 to 1200 pounds per wheel. Check your truck manual for rated load limits. Do not exceed the truck nameplate capacity, as overloading causes rapid core fatigue and uneven wear, shortening tire life to 6 to 12 months.
Q: How do I know when the SU 10X4.5X8-SF-P needs replacement?
A: Replace the tire when you see visible chunks missing, chunks from the edge, cracking or spalling on the outer surface, or when diameter wear exceeds 0.5 inches. A tire that is worn to a cone shape indicates misalignment or overloading. Check wheel alignment and truck loading before installing new tires to prevent premature repeat wear.
Q: Can I swap SU 10X4.5X8-SF-P tires between different lift truck brands?
A: If the receiving truck has an 8 inch wide wheel with 10 inch diameter, the tire will fit physically. However, verify the core material and load rating match your trucks specifications. Some manufacturers require OEM cores for warranty. Always check your truck manual for approved tire types before cross-installing between brands.
Q: What maintenance extends the life of the SU 10X4.5X8-SF-P drive tire?
A: Keep wheels aligned and load centered on the truck. Avoid spinning or dragging loads, which causes melting and edge delamination. Inspect tires weekly for chips, chunks, or surface separation. Clean tires of oil and chemical spills, as these soften polyurethane. Rotate tires if your truck design allows it every 2000 to 3000 operating hours. Proper maintenance extends tire life from 18 to 36 months.
