Product Description
Drive Tire, Poly, Smooth Crown
Specifications: 13.000 inch diameter x 4.500 inch width (13.000" x 4.500" | 13 x 4.5 wheel | 330.20mm x 114.30mm)
Specifications
Wheel Specifications
| Outside Diameter (in) | 13.000 |
| Width (in) | 4.500 |
| Outside Diameter (mm) | 330.20 |
| Width (mm) | 114.30 |
| Material | Cushothane XL 97A |
Frequently Asked Questions
Q: Which pallet jack brands and models use the SU 13 X 4.5 X 8-SC-XL wheel?
A: The SU 13 X 4.5 X 8-SC-XL fits Crown, Toyota, Raymond, Yale, Hyster, and Linde electric lift trucks with 8-inch hub assemblies and matching bolt patterns. This wheel is commonly found on 4500 to 6000 lb capacity models. Always verify bolt pattern, hub depth, and bolt count on your current wheel before ordering to ensure exact compatibility.
Q: Why choose XL 97A durometer for a load wheel?
A: XL 97A is a harder polyurethane that resists abrasion, maintains shape under heavy loads, and lasts significantly longer than softer EZ compounds. It is ideal for high-cycle warehouse operations, outdoor dock environments, and applications where wheel replacement frequency must be minimized. The trade-off is slightly less grip and more noise on smooth concrete.
Q: What is the recommended load capacity of this wheel?
A: The SU 13 X 4.5 X 8-SC-XL is rated for electric lift trucks with total capacities up to 6000 lbs. Actual load per wheel depends on truck configuration, number of wheels in use, and load distribution. Never exceed your lift truck manufacturer nameplate rating. Install wheels in matched sets of four to maintain even handling and load distribution.
Q: How do I install this wheel on my Raymond or Crown pallet jack?
A: Safely lift the truck using proper jack stands. Locate the retaining clip or bolt securing the wheel to the hub. Remove the fastener and slide the old wheel off the axle. Align the new SU wheel with the hub and slide it on until it seats fully. Replace the clip or bolt and tighten securely. Verify no wobble by rotating the wheel by hand before lowering the truck.
Q: How long does the XL 97A compound last in a typical warehouse?
A: In standard warehouse conditions with 8 to 10 hours daily operation, expect 24 to 36 months of service life. High-cycle operations may achieve 18 to 24 months. High-wear outdoor dock environments may reduce lifespan to 12 to 18 months. Inspect all wheels every three months for flat spotting, cracks, or heat damage. Replace as a matched set when any wheel shows significant wear.
Q: What symptoms indicate this wheel is failing and should be replaced?
A: Signs of wheel failure include flat spots on the tread, visible cracks or chunks missing, a hard glazed surface, wobbling during rotation, or grinding noise when the wheel turns. If the truck pulls to one side or feels unbalanced, one wheel may be damaged. Replace all four wheels as a set when any wheel shows these symptoms to restore even handling.