Product Description
POLY DRIVE TIRE, 87A RED
Specifications: 9.000 inch diameter x 5.000 inch width (9.000" x 5.000" | 9 x 5 wheel | 9 x 5-0/0 | 228.60mm x 127.00mm)
Specifications
Wheel Specifications
| Outside Diameter (in) | 9.000 |
| Width (in) | 5.000 |
| Outside Diameter (mm) | 228.60 |
| Width (mm) | 127.00 |
| Drive Tire Profile | Smooth Flat |
| Material | Cushothane EZ 85A |
Frequently Asked Questions
Q: What is the load capacity and speed rating for this tire?
A: The SU 9X5X5-SF-EZ is rated for 3020 lbs capacity at 6 mph maximum operating speed. Do not exceed this load or speed rating as it will cause premature failure and potential safety hazards on warehouse floors.
Q: What equipment models does this 9x5 tire fit?
A: This 9 inch diameter by 5 inch width tire (228.60mm x 127.00mm) is compatible with electric lift trucks and warehouse forklifts that use the 9x5 wheel configuration. Always verify your equipment wheel mount dimensions before ordering to ensure proper fit.
Q: How does Cushothane EZ material differ from standard polyurethane?
A: Cushothane EZ is a proprietary elastomer compound that provides enhanced cushioning and ride comfort compared to rigid polyurethane. At 85A durometer hardness, it absorbs floor impact better and reduces noise, making it ideal for indoor warehouse environments where operator comfort matters.
Q: Can this tire handle chemical spills or aggressive cleaning?
A: Cushothane EZ tires offer good chemical resistance and can tolerate exposure to common warehouse cleaning agents and light oil. However, extended contact with solvents or petroleum products can degrade the compound. Rinse the tire if exposed and allow it to dry before returning to service.
Q: What is the typical lifespan before this tire needs replacement?
A: Under normal warehouse conditions at rated load and speed, expect 2 to 4 years of service life. Lifespan depends on floor surface texture, frequency of use, and operating conditions. Replace the tire when the tread flattens significantly or when visible cracks or chunking appears on the surface.
Q: How do I install this press-on drive tire?
A: Clean the wheel hub thoroughly before installation. Heat the tire to approximately 120 to 140 degrees Fahrenheit using a heat gun or oven to expand the bore. Quickly press the warm tire onto the hub using a tire press or arbor press. Do not force the tire or use hammering methods as this damages the elastomer. Allow 4 to 8 hours for the tire to cool and set fully before operating the equipment.