Product Description
The Crown CR 077133-002 Horn Button Switch is an OEM panel-mount momentary push-button switch rated for 36VDC, designed for horn circuits on Crown electric lift trucks. Features include single-pole normally open contacts, 10A current rating, snap-in thermoplastic housing, and round flush actuator.
Specifications
Compatibility
| Compatible Lift Truck Series | Specified for Crown electric pallet trucks and stackers using 36V horn switch configuration |
Electrical
| Rated Voltage | 36VDC |
| Contact Rating (nominal) | 10A at 36VDC |
Material & Construction
| Housing Material | Thermoplastic reinforced |
| Button Material | Molded polymer |
Part Numbers
| Manufacturer Part Number | CR 077133-002 |
| OEM Part Number | 077133-002 |
Frequently Asked Questions
Q: What is the voltage rating for the CR 077133-002 horn button switch?
A: The CR 077133-002 is rated for 36VDC operation. This higher voltage rating distinguishes it from lower-voltage Crown switches and makes it compatible with 36-volt electric lift truck systems. Verify your equipment voltage before ordering to confirm this switch matches your truck power system.
Q: What is the current rating for this horn button switch?
A: The CR 077133-002 is rated for 10 amperes at 36VDC. Horn circuits typically draw moderate current to power audible warning devices. Do not exceed the 10A rating, as doing so will damage the switch contacts and create a safety hazard.
Q: What contact configuration and housing materials does the CR 077133-002 have?
A: The CR 077133-002 features single-pole normally open contacts, thermoplastic reinforced housing, and a round flush molded polymer button actuator. The thermoplastic construction resists impact, vibration, and environmental contamination typical in industrial lift truck applications. The normally open configuration means the switch energizes the horn circuit only when the button is pressed.
Q: What Crown lift truck models are compatible with the CR 077133-002?
A: The CR 077133-002 is specified for Crown electric pallet trucks and stackers equipped with 36-volt power systems. Specific model compatibility depends on your truck serial range and control panel design. Verify horn button switch compatibility with your equipment serial number before ordering.