Product Description
Valu Jack GWK-VJ-LW VJ 6600 Standard Load Wheel Kit features two black ultra-polyurethane load wheel assemblies with sealed ball bearings, axles, and fasteners. Engineered for manual pallet jack use, compatible with the Valu Jack VJ 6600 Standard model. Wheel diameter is 3.00 inches, width 3.75 inches, and durometer 70D. Supplied assembled for rapid bolt-on replacement.
Compatibility: Fits pallet jacks made by Valu-Jack, model VJ 6600 Standard. Alternate model: VJ6600Standard. SKU: GWK-VJ-LW
Specifications
Physical Specifications
| Bearing Material | Chrome steel |
| Construction | Single-piece ultra-poly construction with steel core |
| Durometer Rating | 70 Shore D |
| Bearing Type | Sealed ball bearings |
| Quantity | 2 wheel assemblies |
| Compatibility | Valu-Jack VJ 6600 Standard |
Compatibility
| Wheel Material | Ultra-Polyurethane, 70D durometer |
| Axle Material | Carbon steel |
| Wheel Diameter | 3.00 inches |
| Wheel Width | 3.75 inches |
Frequently Asked Questions
Q: Is GWK-VJ-LW compatible with both VJ 6600 Standard and other Valu-Jack models?
A: GWK-VJ-LW is specifically engineered for the Valu-Jack VJ 6600 Standard model and the alternate designation VJ6600Standard. Do not use on VJ-5500 or VJ-2 models without verifying axle spacing and bore diameter. Different Valu-Jack models have different mounting configurations. Always match the part number on your jack documentation to GWK-VJ-LW before ordering.
Q: Does GWK-VJ-LW include fasteners and are bearings pre-installed?
A: Yes. GWK-VJ-LW arrives with two black ultra-polyurethane load wheel assemblies with sealed ball bearings and axles pre-installed. Fastening hardware is included. The kit is supplied fully assembled and ready for bolt-on replacement. No additional tools beyond a socket set are required for installation.
Q: Can GWK-VJ-LW be installed without replacing steer wheels?
A: Yes. GWK-VJ-LW is a load wheel-only kit. If your steer wheels are still serviceable, you can replace only the front load wheels while keeping rear steering components intact. The VJ 6600 Standard has independent load and steer wheel systems, so partial replacement is practical and cost-effective.
Q: What is the load rating maintained by GWK-VJ-LW wheels?
A: GWK-VJ-LW wheels are rated to support the full VJ 6600 Standard jack capacity. Wheel diameter is 3.00 inches and width is 3.75 inches with 70D durometer ultra-polyurethane. As long as wheels are intact without visible cracks or diameter less than 2.85 inches, the full 6600-pound capacity is maintained.
Q: Do the sealed ball bearings in GWK-VJ-LW require maintenance?
A: No. GWK-VJ-LW bearings are sealed ball bearings packed with factory lubricant. They do not require periodic greasing or maintenance during normal use. If you notice wheel grinding, resistance to rotation, or bearing noise, the seal has failed and the wheel assembly must be replaced as a unit. Do not attempt to relubricate sealed bearings.
Q: What symptoms indicate GWK-VJ-LW wheels are wearing out?
A: Jack lift height decreases without obstruction, wheels develop flat spots on the floor-contact side, steering becomes harder or pulls to one side, or polyurethane shows visible cracks. Roll the jack slowly—worn wheels will not rotate as freely. If one wheel is noticeably harder or softer than the other, material degradation has begun and replacement is needed soon.