Product Description
Shaft for roller
Frequently Asked Questions
Q: What is the VS PM4-225SL-F shaft for roller used for?
A: The VS PM4-225SL-F is a steering knuckle shaft that supports the load wheel assembly on manual pallet jacks. It passes through the wheel bore and bearing assembly to provide rotational support and directional control.
Q: What material and diameter is the VS PM4-225SL-F shaft?
A: The VS PM4-225SL-F shaft is 20mm diameter chrome-plated steel with a length of 85mm. Chrome plating provides corrosion and wear resistance, preventing rust in wet storage and outdoor environments.
Q: Which pallet jack models are compatible with the VS PM4-225SL-F shaft?
A: The VS PM4-225SL-F shaft fits load wheel steering knuckles on Crown, Toyota, Raymond, Yale, and Hyster manual pallet jacks with 5000 to 8000 pound capacity. Verify shaft length and bore diameter before ordering.
Q: Why would the VS PM4-225SL-F shaft need replacement?
A: Replace the VS PM4-225SL-F if you observe bent steering or wobbling wheels, chrome plating damage exposing bare steel, or seizing bearings on the shaft. Bent shafts cause poor handling and uneven tire wear.
Q: How do I verify the VS PM4-225SL-F shaft is the correct replacement?
A: Measure the bore diameter of your wheel assembly bearing and the length of the current shaft. The VS PM4-225SL-F requires a 20mm bore fit. Cross-reference your current part number against the SKU to confirm compatibility.
