Product Description
Ultra-polyurethane load wheel kit, equivalent to GWK-272744-LW and GWK-CPI-LW, optimized for Wesco manual pallet jack models, includes axles, bearings, and fasteners; 3 inch diameter by 3-3/8 inch wide, 70D durometer construction.
Compatibility: Fits pallet jacks made by Wesco, model CPI. SKU: GWK-WESCO-LW
Specifications
Material & Construction
| Wheel Material Specification | Ultra-polyurethane, 70D hardness |
| Wheel Diameter | 3 inch |
| Wheel Width | 3-3/8 inch |
| Durometer Rating | 70D |
| Included Components | Load wheel assemblies, sealed roller bearings, heat-treated steel axle shafts, fastener hardware |
Part Numbers & Compatibility
| Cross-Reference Part Numbers | Equivalent to GWK-272744-LW, GWK-272755-LW, GWK-CPI-LW |
| Factory-Spec Part Number | GWK-272744-LW |
| Compatible Pallet Jack Models | Wesco model 272744, Wesco CPI, Wesco TSHL21 |
Frequently Asked Questions
Q: Is GWK-WESCO-LW equivalent to GWK-272744-LW and GWK-CPI-LW?
A: Yes. GWK-WESCO-LW is the direct equivalent to GWK-272744-LW, GWK-272755-LW, and GWK-CPI-LW. All three part numbers provide identical ultra-polyurethane 70D durometer construction, 3 inch diameter by 3-3/8 inch width, and fit Wesco model CPI and model 272744 pallet jacks. Verify your jack nameplate before ordering to confirm model match.
Q: What Wesco manual pallet jack models does this wheel kit fit?
A: GWK-WESCO-LW fits Wesco model 272744 and Wesco TSHL21 pallet jacks, and any manual jack designated as Wesco model CPI. Do not use on electric models or non-Wesco equipment. Check your equipment nameplate for the exact model number before purchase.
Q: What components are included in the GWK-WESCO-LW kit?
A: The kit includes load wheel assemblies with 70D ultra-polyurethane construction, sealed roller bearings, heat-treated steel axle shafts, and complete fastener hardware. All components are pre-assembled for direct installation. No additional parts or tools beyond a wrench set are required for replacement.
Q: How do I know when to replace the GWK-WESCO-LW wheels?
A: Replace wheels when you observe visible flat spots, chunks missing from the tread, uneven wear patterns, or when the jack pulls to one side during operation. If wheels no longer roll smoothly or make grinding noises, remove and inspect bearings for damage. Standard replacement interval is 2-3 years under normal warehouse duty cycles, or 1-2 years in continuous use environments.
Q: What is the load capacity and operating specification for GWK-WESCO-LW wheels?
A: GWK-WESCO-LW wheels have a 3 inch diameter and 3-3/8 inch width with 70D durometer ultra-polyurethane construction rated for standard manual pallet jack duty (typically 5000 lb capacity jacks). Do not exceed the rated capacity of your parent jack. Wheels are rated for indoor use on smooth to semi-rough warehouse floors. High-temperature floors above 120 degrees Fahrenheit may degrade polyurethane tread prematurely.