Product Description
This Load Wheel Kit is specifically engineered for Toyota 7HBC30 pallet jacks, featuring two robust 97A Poly Load Wheel Assemblies, along with axles, bearings, and fasteners. Designed for durability, it enhances operational efficiency by providing smooth and quiet maneuverability in demanding environments, while minimizing floor marking.
Compatibility: Fits pallet jacks made by Toyota, model 7HBC30. SKU: GWK-7HBC30-LW-XL
Specifications
Compatibility
| Compatible Models | Toyota 7HBC30 Electric Pallet Jack |
Material
| Wheel Material | 97A durometer polyurethane |
Material Handling
| Application | Replacement load wheel kit for industrial material handling applications |
Part Numbers
| OEM Part Number | GWK-7HBC30-LW-XL |
Frequently Asked Questions
Q: What models does the GWK-7HBC30-LW-XL fit, and will it work on other Toyota pallet jacks?
A: The GWK-7HBC30-LW-XL is engineered specifically for Toyota 7HBC30 electric pallet jacks. Do not use on 7HBE30 or 7HBW23 models, as axle spacing and bearing housing dimensions differ. The XL designation indicates 97A durometer wheels, which are stiffer than standard 95A wheels. Always verify your model number on the jack nameplate before ordering.
Q: What is the difference between 97A and 95A durometer wheels, and which should I choose?
A: 97A durometer wheels (GWK-7HBC30-LW-XL) are harder and more wear-resistant, better for rough floors, metal debris, and high-cycle operations. 95A wheels are slightly softer and provide better floor protection in retail or display environments. The XL designation means this kit uses the stiffer 97A polyurethane compound. Choose 97A for warehouses and production floors; choose 95A if floor marking is a concern.
Q: Does the kit include everything needed for installation, and do I need special tools?
A: Yes, GWK-7HBC30-LW-XL includes two complete 97A poly load wheel assemblies, axles, bearings, and fasteners. No special tools are required beyond a basic socket set and hex key. Push the old axle out of the fork carriage, slide the new assembly in, install fasteners, and torque to 35-40 foot-pounds. Installation takes 15-20 minutes per wheel. Do not apply grease to sealed bearings.
Q: How long do these wheels last, and what causes premature failure?
A: 97A wheels typically last 12-24 months under continuous warehouse use, depending on load, floor condition, and debris. Premature failure occurs when wheels run flat-spotted due to overload, damaged bearings from impact, or water ingestion into sealed bearing assemblies. Check wheel condition monthly; replace if you notice flat spots, noise, or resistance to rotation. Cold storage and metal shavings accelerate wear.
Q: Is the GWK-7HBC30-LW-XL equivalent to any OEM or cross-brand part numbers?
A: GWK-7HBC30-LW-XL is the OEM part number for Toyota 7HBC30 wheels and does not have published cross-references to other brands. Always order by exact SKU to ensure correct axle length, bearing type, and hub design. Do not attempt to substitute wheels from 7HBE30 or 7HBW23 kits; even though wheel diameter may match, internal fit dimensions will not align with 7HBC30 fork geometry.
Q: What is the load capacity of this wheel kit, and can it handle overloaded pallet jacks?
A: The GWK-7HBC30-LW-XL is rated for continuous use on Toyota 7HBC30 jacks, which have a 3,000-pound lift capacity. These wheels are rated for the factory load spec; do not exceed it. Overloading causes wheel flatting, bearing seal failure, and axle bending. Verify that your jack lift rating matches your payload. Polyurethane wheels compress under load; harder 97A compound resists this better than 95A.