Product Description
This load wheel kit includes two Durarun 95A Poly Load Wheel Assemblies complete with axles, bearings, and fasteners, ensuring quick and hassle-free installation. With superior wear resistance and a strong grip, the durable 95A polyurethane wheels are designed for heavy loads while minimizing floor damage, making them ideal for a variety of settings including warehouses and display floors.
Compatibility: Fits pallet jacks made by Toyota, model 7HBE30. SKU: GWK-7HBE30-LW
Specifications
Material & Construction
| Core Material | Machined steel |
| Surface Hardness | Shore A95 durometer |
| Design Tolerance | Wheel machining tolerance ±0.005 inch |
Part Numbers
| SKU | GWK-7HBE30-LW |
| Manufacturer Part Number | GWK-7HBE30-LW |
| OEM Part Number | GWK-7HBE30-LW |
| Compatible Models | Toyota 7HBE30 Electric Pallet Jack |
Frequently Asked Questions
Q: Does the GWK-7HBE30-LW fit Toyota 7HBE30 models exclusively, and what about 7HBC30 or 7HBW23?
A: GWK-7HBE30-LW is engineered for Toyota 7HBE30 electric pallet jacks only. Do not install on 7HBC30 or 7HBW23 models; axle spacing and fork carriage width are different. The 7HBE30 uses a wider stance than the 7HBC30. Always cross-check your jack model number on the nameplate before purchasing. Fitting the wrong kit can damage the fork assembly and void the warranty.
Q: What makes the Durarun 95A wheels different from other 95A wheels, and is this kit better for certain floors?
A: Durarun is a commercial-grade polyurethane formulation optimized for warehouse and display floor use. The 95A durometer (Shore A hardness) balances wear resistance with floor protection, reducing marking on polished concrete and retail floors. Durarun wheels have a wider wear window than commodity polyurethane, making them last 15-20 percent longer in mixed-use environments. If your floor is sensitive, this 95A kit is the right choice.
Q: What is included in the GWK-7HBE30-LW kit, and is installation straightforward?
A: The kit includes two complete Durarun 95A load wheel assemblies, axles, sealed bearings, and all fasteners. Installation is plug-and-play: remove the old axle by pushing it out, slide the new assembly in, and install fasteners with a socket wrench. Torque fasteners to 35-40 foot-pounds and allow wheel to spin freely before use. Total time is 15-20 minutes per side. Do not reuse old axles or bearings.
Q: What is the design tolerance and bearing specification for this kit?
A: GWK-7HBE30-LW wheels are machined to a tolerance of plus or minus 0.005 inch on the bore diameter to ensure precise fit on the axle. Bearings are chrome steel (SAE 52100) with sealed design, rated for continuous duty in warehouse environments. The seal design prevents dust and water ingress, extending bearing life to 18-24 months under normal use. Do not add grease or attempt to clean sealed bearings.
Q: How do I diagnose worn-out wheels or failing bearings on my GWK-7HBE30-LW kit?
A: Listen and feel for these symptoms: grinding noise from the wheel assembly (failed bearing), resistance when rotating the wheel by hand (bearing spalling), flat spots or visible chunks missing from the wheel (overload or impact damage), or fluid leaking from the bearing seal (water or hydraulic fluid contamination). If the jack pulls to one side or feels sluggish, one wheel is likely degraded. Replace the entire assembly; do not attempt bearing replacement.
Q: Does GWK-7HBE30-LW have any OEM cross-references or equivalent part numbers I should know?
A: GWK-7HBE30-LW is the OEM part number for Toyota 7HBE30 wheels and does not have published equivalents from other manufacturers. Always order by this exact SKU. Do not confuse this with GWK-7HBE30-LW-XL, which uses 97A wheels instead of 95A and is a different SKU. Verify the 7HBE30 model before ordering to avoid returns or fitment problems.