Product Description
This load wheel kit enhances the efficiency and operation of machinery with two Durarun 95A Poly Load Wheel Assemblies that include axles, bearings, and fasteners, ensuring effortless installation. The assemblies deliver improved functionality, providing smoother and quieter operation compared to traditional load wheels.
Compatibility: Fits pallet jacks made by Raymond, model 8510. SKU: GWK-8510-LW
Specifications
Dimensional Specifications
| Fitment | Designed for direct replacement on Raymond 8510 series load wheel positions |
Material & Construction
| Wheel Material Specification | High-performance polyurethane compound, 95A durometer |
Part Numbers
| Manufacturer Part Number | GWK-8510-LW |
| OEM Part Number | GWK-8510-LW |
| Compatible Equipment | Raymond Model 8510 Electric Lift Truck |
Frequently Asked Questions
Q: How does the GWK-8510-LW differ from the GWK-8510-LW-XL?
A: Both kits fit Raymond 8510 pallet jacks, but they differ in wheel durometer. The GWK-8510-LW uses 95A polyurethane, while the GWK-8510-LW-XL uses 97A. The 95A is slightly softer and provides better shock absorption and floor protection on very hard concrete. The 97A is harder, more load-capable, and more wear-resistant on rough surfaces. Choose 95A for finesse environments with sensitive flooring; choose 97A for high-volume warehouse operations with durable concrete.
Q: Is the GWK-8510-LW a direct replacement, or do I need to modify the jack?
A: Yes, it is a direct replacement. The GWK-8510-LW is engineered for direct bolt-on fitment to Raymond 8510 series jacks. No frame modifications, welding, or re-drilling are required. Remove the existing wheel assembly fasteners, slide out the old wheels and axles, and install the new components. Verify that the wheel assemblies spin freely and do not rub against the frame or forks.
Q: What tools do I need to install the GWK-8510-LW?
A: You will need a socket wrench set (typically 10mm, 12mm, 14mm, and 17mm), a torque wrench, and a tire or mechanical puller if the old wheels are stuck. A bearing puller is not necessary because the bearings arrive pre-installed in the new wheel assemblies. Work gloves and safety glasses are recommended. Estimated installation time is 20-30 minutes per wheel assembly.
Q: What is the maximum load rating for the GWK-8510-LW wheel assemblies?
A: The GWK-8510-LW wheel assemblies are rated for the full load capacity of the Raymond 8510 pallet jack, which is typically 5,500 pounds total rated capacity. The 95A polyurethane compound and chrome steel bearings are engineered to handle sustained loads at this rating. Do not exceed the jacks rated capacity, as this will cause accelerated wheel wear, bearing damage, and loss of precision steering.
Q: Do these wheels leave marks on vinyl or epoxy-coated floors?
A: The 95A polyurethane Durarun wheels are formulated to minimize marking on most coated floors. However, some marking can occur on light-colored epoxy if wheels are left stationary for extended periods or under very high pressure. To prevent this, do not park the jack in direct sunlight on coated floors, ensure wheels are clean and dry before operation, and avoid leaving loaded jacks idle on pristine epoxy. Test the wheels on a small area of your flooring before full deployment.
Q: Can I mix different wheel materials on the same jack?
A: No. Always replace both load wheels as a matched pair. Mixing wheel materials—for example, one 95A and one 97A wheel—creates uneven rolling resistance and steering bias, which makes the jack difficult to control and accelerates wear on the softer wheel. Always order a complete kit and replace both wheels simultaneously to ensure predictable handling and even load distribution.