Product Description
Load wheel kit for Yale MPE060VG electric pallet jacks. Includes high-durability 97A polyurethane load wheel assemblies, precision ground steel axles, sealed press-fit ball bearings, and all zinc plated fasteners for direct bolt-on installation. Designed for high-duty cycle industrial material handling applications.
Compatibility: Fits pallet jacks made by Yale, model MPB 060VG. Alternate model: MPB060VG. SKU: GWK-MPE060VG-LW-XL
Specifications
Compatibility
| Replaces | Load wheel assemblies for Yale electric pallet jack model MPE060VG |
Material & Construction
| Finish/Coating | Polyurethane bonded to steel wheel core |
Part Numbers
| Manufacturer Part Number | GWK-MPE060VG-LW-XL |
| Cross-Reference Part Numbers | Fits Yale OEM part number MPE060VG |
| Compatible Models | Yale MPE060VG electric pallet jack |
Performance Specifications
| Service Cycle | Continuous use—rated for over 4 hours daily operation |
Frequently Asked Questions
Q: What Yale pallet jack models does the GWK-MPE060VG-LW-XL load wheel kit fit?
A: GWK-MPE060VG-LW-XL fits Yale MPE060VG and MPB060VG electric pallet jacks. Verify your serial number or model nameplate before ordering to ensure direct fitment without modification.
Q: What is the polyurethane durometer rating on these load wheels and why does it matter?
A: GWK-MPE060VG-LW-XL features 97A Shore A polyurethane wheels, which provides higher load-bearing stiffness and slower wear than softer 70D or 80D grades. 97A rating suits continuous high-duty cycle operations—over 4 hours daily—on hard concrete floors in warehouses and distribution centers.
Q: Are the bearings sealed and what maintenance is required?
A: Yes, GWK-MPE060VG-LW-XL includes sealed press-fit ball bearings that do not require lubrication or repacking. Bearings are maintenance-free for the life of the wheel assembly. Inspect for damage or binding during routine forklift pre-shift walks; replace only if seized or noisy.
Q: Is installation bolt-on only or does the frame need modification?
A: GWK-MPE060VG-LW-XL is direct bolt-on. Remove the old wheel assemblies, slide out the axles, and press in new sealed bearings using an arbor press. Install the new axles, load wheels, and fasteners—all zinc-plated hardware is included. No welding or frame drilling required.
Q: What is the expected service life of these load wheels under heavy use?
A: Depending on floor surface, load weight, and daily cycle hours, 97A polyurethane wheels typically last 12 to 18 months under continuous high-duty warehouse operation. Softer floors or lighter loads extend wheel life. Monitor wheel diameter—replace when worn more than 0.25 inch below spec or when flat-spotting appears.
Q: Can GWK-MPE060VG-LW-XL wheels be used outdoors or on rough surfaces?
A: 97A polyurethane is optimized for hard, smooth indoor concrete. Outdoor use or uneven surfaces will accelerate wear and may cause pulling or uneven rolling. Softer 70D or 80D grades perform better on rough terrain, but GWK-MPE060VG-LW-XL is designed for industrial warehouse and dock floors only.