Product Description
GWK-MPE080VG-LW-XL load wheel kit for Yale electric pallet trucks features 3.25 x 4.50 97A Shore polyurethane wheels
Compatibility: Fits pallet jacks made by Yale, model MPE 060VG. Alternate model: MPE060VG. SKU: GWK-MPE080VG-LW-XL
Specifications
Part Numbers
| Manufacturer Part Number | GWK-MPE080VG-LW-XL |
| OEM Part Number | MPE080VG-LW-XL |
| Compatible Equipment Model | Yale MPE080VG electric pallet truck |
Frequently Asked Questions
Q: Will GWK-MPE080VG-LW-XL fit Yale MPE060VG pallet jacks or only MPE080VG?
A: GWK-MPE080VG-LW-XL is specified for Yale MPE080VG electric pallet trucks. While some overlap exists between 60VG and 80VG mounting geometry, verify your nameplate and serial number before ordering. Substituting wrong wheel kits can cause misalignment and uneven wear. Contact the manufacturer with your model number to confirm fitment.
Q: What wheel size and polyurethane grade does GWK-MPE080VG-LW-XL specify?
A: GWK-MPE080VG-LW-XL features 3.25 x 4.50 inch wheels with 97A Shore A polyurethane. This stiffer compound reduces rolling resistance, extends service life on smooth concrete, and suits high-volume warehouse operations. The XL designation indicates this is a premium, fully-specified kit with consistent 97A durometer across both wheels.
Q: Are the axles and bearings sealed, and do they require repacking?
A: Yes, GWK-MPE080VG-LW-XL includes hardened steel axles and sealed ball bearings that are factory-packed with grease. Do not repack or add lubricant. Sealed bearings are maintenance-free for life. If a bearing fails or binds, replace the entire wheel assembly—individual bearings cannot be serviced in the field.
Q: Can I install GWK-MPE080VG-LW-XL without an arbor press or specialized bearing tool?
A: Yes, but an arbor press is strongly recommended. If unavailable, use a soft-head mallet to gently tap new bearings onto the axle shafts and into the frame bore. Work slowly and check alignment frequently. Misaligned bearings will bind and cause premature failure. If you lack a press, contact a local bearing supplier or hydraulic shop to press bearings for a small fee.
Q: What is the expected wheel life under heavy duty operation?
A: 97A Shore A polyurethane wheels rated for continuous heavy-duty use typically last 12 to 18 months on hard, smooth indoor concrete. Heavier loads, frequent sharp turns, or rough floors will reduce life. Monitor wheel diameter monthly; replace when worn more than 0.25 inch or when flat-spotting or cracking appears. Worn wheels compromise steering precision and load stability.
Q: What surface finish and materials are used on the axles and fasteners?
A: GWK-MPE080VG-LW-XL includes hardened steel axles finished for precision fit and zinc-plated fastener hardware to resist corrosion. Zinc plating protects against rust in humid warehouse and dock environments. Do not use bare steel fasteners or fasteners from other kits; always use the matched hardware supplied in the box.