Product Description
BT Prime Mover load wheel kit for electric pallet jack, includes two Durarun 95A poly load wheels with axles, bearings, and fasteners. Designed for direct replacement on PMX 1 walkie pallet trucks.
Compatibility: Fits pallet jacks made by Crown, model PMX. SKU: GWK-PMX-LW-XL
Specifications
Part Numbers
| Manufacturer Part Number | GWK-PMX1-LW-XL |
| Compatible Models | BT Prime Mover PMX 1 Walkie Pallet Truck |
Frequently Asked Questions
Q: What pallet jacks does the GWK-PMX-LW-XL load wheel kit fit?
A: The GWK-PMX-LW-XL is a direct replacement kit designed for the BT Prime Mover PMX 1 Walkie electric pallet truck. It fits Crown-manufactured models with the PMX designation. Always verify your truck model nameplate before ordering. If you have a PMX model made by a different OEM, contact us with your serial number for confirmation.
Q: What wheels are included in the GWK-PMX-LW-XL kit?
A: This kit includes two Durarun 95A polyurethane load wheels with 95 Shore A durometer rating. Each wheel comes pre-assembled with precision ball bearings, hardened steel axles, and all mounting fasteners. The wheels are rated for standard warehouse floor loading and provide smooth operation on concrete and sealed surfaces.
Q: Can I use the GWK-PMX-LW-XL wheels on a different Crown pallet jack model?
A: No. This kit is engineered specifically for the PMX 1 Walkie configuration. Using incompatible wheels can damage fork arm mounting points, compromise load capacity, and create safety hazards. Crown PMX models use unique axle diameters and mounting hole patterns. If you need wheels for a different Crown model, verify the correct part number before purchasing.
Q: What tools and steps are required to install the GWK-PMX-LW-XL kit?
A: Installation requires a 1/2 inch socket wrench, axle puller tool, and basic maintenance stand. Lower the truck fully, remove cotter pins and axle fasteners, slide off old wheels, insert new axle assemblies with bearings, torque fasteners to 35 foot-pounds, and install new cotter pins. Do not operate the truck until both wheels are fully installed and fasteners are secure. Improper installation can cause wheel failure during operation.
Q: How long do Durarun 95A load wheels typically last?
A: Wheel lifespan depends on duty cycle, floor conditions, and load consistency. In standard warehouse use with proper maintenance, expect 2000 to 4000 operating hours before noticeable wear. Rough or outdoor floors reduce lifespan. Inspect wheels every six months for flat spots, cracking, or bearing wear. Replace when tread depth is less than 3/16 inch or if you notice pulling to one side during operation.
Q: What is the weight capacity of the GWK-PMX-LW-XL wheels?
A: The Durarun 95A wheels in this kit are rated to support the full load capacity of the BT Prime Mover PMX 1, which is typically 4000 to 5000 pounds depending on your specific truck configuration. Do not exceed the truck manufacturer maximum load rating. Overloading accelerates bearing wear and can cause premature wheel failure. Verify your truck nameplate for exact capacity limits.