Product Description
GWK-RJ50N-CK complete wheel replacement kit engineered for Raymond RJ50N electric pallet jacks. Assembly features 2.9-inch diameter ultra-polyurethane load wheels with 70 Shore D durometer rating and 7-inch x 2-inch polyurethane steer wheels. Kit includes sealed precision roller bearings, axle shafts, and all necessary mounting fasteners for complete wheel assembly replacement.
Compatibility: Fits pallet jacks made by Raymond, model RJ50. SKU: GWK-RJ50N-CK
Specifications
Material & Construction
| Load Wheel Material | Ultra-Polyurethane compound, 70 Shore D durometer |
| Steer Wheel Material | Polyurethane compound |
Part Numbers & Compatibility
| Manufacturer Part Number | GWK-RJ50N-CK |
| Equipment Compatibility | Raymond Model RJ50N electric pallet jack |
Frequently Asked Questions
Q: What is the difference between GWK-RJ50-CK and GWK-RJ50N-CK?
A: Both kits are complete wheel assemblies for Raymond RJ50 series jacks. The GWK-RJ50N-CK is engineered for the RJ50N electric model, while GWK-RJ50-CK is for manual models. The wheel dimensions are identical (2.9 inch load wheels, 7.0 x 2.0 inch steer wheels at 70 Shore D), but electrical jacks require validated bearing and axle durability. Do not cross-apply these kits.
Q: Does the RJ50N electric power affect wheel or bearing specifications?
A: No. Electric vs. manual operation does not change wheel material or durometer rating. The GWK-RJ50N-CK uses the same 70 Shore D ultra-polyurethane and sealed precision roller bearings as the manual equivalent. The difference is in validation testing and load profiles specific to electric jack duty cycles.
Q: Are steer wheels included in the GWK-RJ50N-CK kit?
A: Yes. This is a complete wheel replacement kit including both load and steer wheels. The kit contains 2.9 inch diameter load wheels and 7 inch by 2 inch steer wheels, all with sealed precision roller bearings and mounting fasteners ready to install.
Q: What tools do I need to install the GWK-RJ50N-CK assembly?
A: Basic hand tools only: socket wrench set (to remove old axle fasteners), adjustable wrench, and possibly a rubber mallet to seat wheels onto axles if they fit snugly. The kit includes pre-installed sealed bearings and hardened steel axle shafts, so no press or special alignment tools are needed for most Raymond RJ50N jacks.
Q: How often should I inspect wheels on an RJ50N electric jack?
A: Inspect GWK-RJ50N-CK wheels weekly for flat spots, cracks, or bearing play. Electric jacks often run longer shifts than manual jacks, so check more frequently than you would for manual equipment. Replace when flat spots exceed 0.25 inches or bearing wobble is noticeable when you spin the wheel.
Q: What is the load capacity rating for this kit on an RJ50N electric jack?
A: GWK-RJ50N-CK supports the full rated capacity of the Raymond RJ50N electric pallet jack (typically 5500 lbs). The wheel assembly is engineered for continuous duty in electric applications. Do not exceed the nameplate capacity; overloading accelerates wheel wear and bearing failure.