Product Description
Washer
Frequently Asked Questions
Q: What does SAE 3/4 mean on the WS SAE 3/4 washer?
A: SAE 3/4 indicates this is a standard SAE (Society of Automotive Engineers) flat washer designed for 3/4 inch diameter bolts. The 3/4 inch refers to the bolt size the washer accommodates, not the washer inner diameter. SAE washers follow standardized dimensions for bolt head seating.
Q: What are the exact inner and outer diameter of the WS SAE 3/4?
A: The WS SAE 3/4 is a standard SAE flat washer. Inner diameter is larger than the 3/4 inch bolt to allow clearance for installation. Outer diameter is designed to distribute bolt head load evenly. Verify dimensions match your equipment specification before ordering.
Q: Can the WS SAE 3/4 be used as a replacement on my pallet jack?
A: The WS SAE 3/4 is compatible with pallet jack models that use 3/4 inch diameter bolts in structural or wheel assembly connections. Confirm the bolt size and washer dimensions match your original part. Using an incorrect washer size can result in inadequate load distribution or fastener failure.
Q: Is the WS SAE 3/4 washer suitable for cold storage and wet environments?
A: The WS SAE 3/4 is a steel washer and will corrode if exposed to moisture, salt spray, or cold storage condensation. In wet or harsh environments, inspect washers annually. If rust pitting or surface degradation is visible, replace with a new washer to maintain fastener security.
Q: Which pallet jack brands use the WS SAE 3/4 washer?
A: The WS SAE 3/4 washer is compatible with various manual and electric pallet jack models from manufacturers including Crown, Toyota, Raymond, Yale, Hyster, and others that use 3/4 inch diameter bolts. Verify the bolt size on your equipment before ordering.
