Product Description
Enhance your Yale MPB040 E electric lift truck's performance and durability with our Load Wheel Kit Poly 95A. This high-quality kit includes everything you need for a smooth and efficient operation. The polyurethane wheels provide excellent traction and wear resistance, while the bearings and axles ensure a stable and long-lasting performance. Upgrade your lift truck today and experience the difference!
Compatibility: Fits pallet jacks made by Yale, model MPB 040 E. Alternate model: MPB040E. SKU: GWK-MPB040E-LW
Specifications
Material & Construction
| Wheel Tread Hardness | 95 Shore A |
Part Numbers
| OEM Part Number | GWK-MPB040E-LW |
| Compatible with Models | Yale MPB040 E (B827) |
Frequently Asked Questions
Q: Will GWK-MPB040E-LW wheels fit my Yale MPB 040 E electric pallet jack model B827?
A: Yes. GWK-MPB040E-LW is OEM-engineered for Yale MPB 040 E series, including serial designation B827. The 95A Shore hardness polyurethane wheels and bearing assemblies are matched to the E-series frame geometry. Do not use this kit on 040 AC or 040 XL models as wheel diameters and axle configurations are different.
Q: Is GWK-MPB040E-LW equivalent to any other brand wheel kits?
A: GWK-MPB040E-LW is Yale OEM. Equivalent kits from other suppliers may exist but cross-compatibility with non-Yale jacks is not guaranteed. Always verify bearing bore diameter and wheel center bore measurements match your jack axle before substituting third-party kits. Mixing OEM and aftermarket components can cause binding or premature bearing failure.
Q: What are the symptoms of worn wheels on my MPB 040 E jack?
A: Worn wheels show flat-spotting on the tread, visible cracks in the polyurethane, or a grinding noise when the jack is manually pumped. The jack may also pull to one side or require excessive pushing force. Inspect wheel tread with a straight edge and replace if depth is less than one-quarter inch or if cracks reach the wheel core.
Q: Do I need any special tools to replace GWK-MPB040E-LW wheels?
A: You will need a jack stand or lift blocks, a wrench for the axle nut, a cotter pin puller, and a soft mallet to seat the wheel onto the axle. No pressing equipment is required if the bearings are pre-assembled. Ensure the jack is fully raised and chocked before removing wheels to prevent injury.
Q: Can I replace just one wheel instead of the full kit GWK-MPB040E-LW?
A: It is not recommended to replace a single wheel. Both wheels should be replaced together to maintain even tread wear and consistent ride height. Mismatched wheel diameters will cause the jack to tilt or pull during pushing, putting uneven strain on the steering mechanism and frame.