Product Description
Crown CR 44536 is an OEM replacement load roller for Crown manual pallet jacks, specifically compatible with PTH 50 Series models. This component is constructed using high-strength polymer with a hardened steel shaft and sealed ball bearing, designed to support pallet trucks with a rated load capacity of 5000 lbs. It fits manual pallet jacks featuring fork widths between 15.8 and 27 inches and fork lengths from 36 to 72 inches. No cross-reference or supersession part numbers are currently availa
Compatibility: Fits pallet jacks made by Crown, model PTH50. SKU: CR 44536
Specifications
Material
| Shaft/Bearing Material | Hardened steel axle with corrosion protection |
Part Numbers
| OEM Part Number | CR 44536 |
| Manufacturer Part Number | CR 44536 |
Frequently Asked Questions
Q: What is the CR 44536 load roller and what is its load capacity?
A: The CR 44536 is a Crown OEM replacement load roller for Crown PTH 50 Series manual pallet jacks, designed to support pallet trucks with a rated load capacity of 5000 lbs. This component is a direct OEM replacement for wear or damage to the original roller.
Q: What materials are used in the CR 44536 construction?
A: The CR 44536 is constructed using high-strength polymer roller with a hardened steel shaft and sealed ball bearing. This combination provides load support durability and resistance to typical warehouse wear.
Q: Which Crown manual pallet jack models accept the CR 44536 roller?
A: The CR 44536 is compatible with Crown PTH 50 Series manual pallet jacks featuring fork widths between 15.8 and 27 inches and fork lengths from 36 to 72 inches. Verify your equipment dimensions match these ranges before ordering.
Q: What is the expected service life of the CR 44536 load roller?
A: Service life depends on usage frequency, load patterns, and floor conditions. The sealed ball bearing in the CR 44536 extends roller life compared to unsealed designs. Rollers typically require replacement after visible flat spots, noise during operation, or reduced load movement smoothness develop.
Q: How do I know when the CR 44536 needs replacement?
A: Replace the CR 44536 if you observe flat spots or worn areas on the roller surface, grinding or squealing noise during pallet movement, increased resistance or stiffness when moving loads, or visible damage to the polymer surface. Any of these symptoms indicates the roller should be swapped out.